RK Rose+Krieger MultiControl mono, Руководство по сборке

Страница: 33 / 107

7. Life Phases
33
De
utsch
English
Fr
a
n
ca
is
Espanol
Italiano
7.2.2 Terminal assignment on the housing
The controller has been designed for maximum 2 drives. The
controller either has the 8-pin socket or the 2-pin socket. The
connections not required must be covered with blind plugs.
Always keep socket 5 sealed during operation in all cases.
6 5 4
3
2 1
7
Socket Connection Remark
1
Drive 1
Connection C
8-pin DIN socket for lifting columns with
respective connector
2 Connection A
2-pin DIN socket for lifting columns with
respective connector
3
Drive 2
Connection C
8-pin DIN socket for lifting columns with
respective connector
4 Connection A
2-pin DIN socket for lifting columns with
respective connector
5 Spare
6 Speed settings 2 to 10 Volt input or potentiometer input
7
Parallel hand switch
with 2 or 6 buttons
5-pin DIN socket