RK Rose+Krieger MultiControl mono, Руководство по сборке

Страница: 38 / 107

7. Life Phases
38
7.6 List of appropriate drives
There is a list of drives which can be connected to the controller in the table below.
7.7 Normal operation
7.7.1 Operating the 2-key hand switch
Using the UP button, the drives are traversed according to
the direction of travel selected. As long as the button is
pressed, traverse it in the direction of travel selected until the
end position is reached or you let go of the button.
By pressing the DOWN button, the drives can be traversed
according to the direction of travel selected. The same con-
ditions apply as for the upwards motion.
When using 2 columns, these are traversed at the same ti-
me, but not synchronously.
In event of a possible malfunction, pull out the mains plug immediately and inform the specialist
staff (service).
Connection A (2-pin socket) Connection C (8-pin socket)
Multilift
Slimlift
Slimlift EM
LZ 60 LZ 60
Drive unit LZ Drive unit LZ
Powerlift med.
Powerlift teleskop
Powerlift Spindel med.
Powerlift M med.
Alpha Colonne Alpha Colonne
DOWN
UP
Ensure that nobody is in the vicinity of the drives when they are moving.
Therefore, only use the hand switch if you can see the drives - risk of accident!