RiverGrille TF2034901-RG Скачать руководство пользователя страница 15

TF2034901-RG Eng                                              Page 15 of 15                                                    20161017-V1 

 

 

LIMITED WARRANTY 

1.  Manufacturer warrants this Product to be free from defects in workmanship and materials for a period of Ninety 

(90) days from the date of purchase, PROVIDED claims are submitted, in writing, with proof of purchase.     

2.  If any part of this item fails because of a manufacturing defect within the Limited Warranty Period, Manufacturer 

offers to replace such part(s) provide that such parts have not been improperly repaired, altered, or tampered 

with or subject to misuse, abuse or exposed to corrosive conditions. This Limited Warranty is, however, subject 

to 

certain limitations, exclusions, time limits and exceptions (Hereinafter “Conditions”) as listed below.    Read 

these Conditions carefully. 

3.  This  Limited  Warranty  shall  be  limited  to  the  replacement  or  repair  of  any  part(s)  which  Manufacturer 

determines,  after  reasonable  examination,  to  have  been  defective  at  the  time  of  manufacturing  and 
manufacturer’s obligation(s) shall be limited to replacement, if any, of defective part(s) which shall be shipped 
at Original Purchaser’s expense to Original Purchaser’s designated shipping address. 

4.  This  Limited  Warranty  is  given  to  and  covers  the 

ORIGINAL  PURCHASER  ONLY 

and  such  coverage 

terminates Ninety (90) days from the date of purchase.

 

5. 

DAMAGE LIMITATION WARNING:   

IN  NO  EVENT  SHALL  MANUFACTURER  BE  LIABLE  FOR  ANY 

INCIDENTIAL OR CONSEQUENTIAL DAMAGES, INCLUDING (BUT NOT LIMITED TO) LOSS OF USE OF 

THE  PRODUCT,  LOSS  OF  TIME,  INCONVENIENCE,  EXPENSES  FOR  TRAVEL,  TRANSPORTATION 

LODGING EXPENSES, LOSS BY DAMAGE TO PERSONAL PROPERTY OR LOSS OF INCOME, PROFITS 

OR REVENUE. 

6. 

MANUFACT

URER’S  OBLIGATION:

   

Manufacturer’s  liability  shall  be  limited  to  the  delivery  of  a  good, 

merchantable Product and, if necessary, the repair or replacement, at manufacturer’s option, of any defective 
part or unit. 

7. 

TRANSFER  LIMITATIONS:

    This  Limited  Warranty  is  not  assignable  or  transferable.    It  covers  only  the 

original purchaser. 

8. 

RESERVED  RIGHT  TO  CHANGE:

    Manufacturer  reserves  the  right  to  make  changes  or  improvements  to 

products it produces in the future without imposing on itself any obligations to install the same improvements in 

the products it has previously manufactured. 

9.  This Limited Warranty gives the Original Purchaser specific legal rights but there may be other rights which vary 

by jurisdiction. 

10.  This warranty does not cover the following items: 

 

Chips or scratches on porcelain or painted surfaces 

 

Rust or corrosion is not deemed a manufacturing or materials defect 

 

Discoloration or loss of paint due to handling during assembly, heat or cleaning products. Paint may 
require touch up. 

 

Stainless steel discoloration or corrosion 

 

Consumables such as batteries 

 

IF CUSTOMER SERVICE BECOME NECESSARY:

 

1. 

The Original Purchaser is responsible for shipping and handling charges of the returned item(s) 

and replacement parts, if any. 

2. 

All parts to be replaced will need to be shipped before replacement items will be sent. 

3. 

Follow  the  Customer  Service  Representative’s  instructions  exactly.  If  a  return  is  necessary,  it 
must be packed carefully and shipped prepaid. 

 

Should you encounter any problems,   

CONTACT US FIRST,      DO NOT return product to the store! 

 

RANKAM (CHINA) MANUFACTURING COMPANY LIMITED 

18/F., New Lee Wah Centre, 88 Tokwawan Road, Kowloon, Hong Kong 

 

CUSTOMER SERVICE: 1 

– 888 – 837 – 1380 

For assistance, contact customer service at 

[email protected]

 

or at 1 

– 888 – 837 – 1380, Mon to Fri, 8:00am – 5:00pm Pacific Standard time 

Содержание TF2034901-RG
















Отзывы: