TF2034901-RG Eng Page 13 of 15 20161017-V1
3. Insert the burner (part 4) into the cooker stand and through the cut-out opening on the
side of the stand.
Insert the threaded tube at the bottom of the burner into the center hole of the burner
bracket. Make sure the alignment pin seats in the notch on the edge of the burner
bracket. Align with the burner pins, then fix the Heat Shield (8) outside the supporting bar
and secure with the nut (on the thread pin).
4. Insert the Regulator Hose Assembly (5) fitting into the burner and tighten. Be sure not to
strip threads on brass fitting. DO NOT OVERTIGHTEN. Proper connection is critical for
correct operation of the unit.
