TF2034901-RG Eng Page 10 of 15 20161017-V1
twice a month). NOTE: Water or air pressure will not normally clear a spider web.
Steps for Cleaning the Burner
:
1. Remove brass connector / hose from the burner.
2. Look inside the burner tube for nests, webs, or mud.
3. To remove the above obstructions, use an accessory
FLEXIBLE
venture brush or bend a small hook on one
end of a long flexible wire such as the one shown in
one small picture.
4. Inspect and clean the burner if needed.
5. Reattach brass connector to burner.
Cleaning and Maintenance
Keep appliance area clear and free from combustible materials, gasoline and other flammable
vapors and liquids.
Do not block holes in bottom or sides of appliance.
Check burner flames regularly.
Use appliance only in well-ventilated space. NEVER use in enclosed space such as carport,
garage, porch, covered patio, or under ANY overhead construction.
Completely thaw meat and poultry prior to placing in hot oil.
To minimize splattering, dry surfaces of meat and poultry prior to placing in hot oil.
When LP tanks is connected to appliance, store outdoors in well-ventilated space and out of
reach of children.
Store appliance indoors ONLY if LP tanks turned off and disconnected, removed form appliance
and stored outdoors.
To keep the appliance clear and free from gasoline and other flammable vapors and liquids.
Not obstructing the flow of combustion and ventilation air.
Keeping the ventilation opening(s) of the cylinder enclosed free and clear from debris.
Clean all cooking surfaces of vessels, aluminum pots and pan with warm, soapy water and a
nylon cleaning pad to avoid oxidation, corrosion and rusting.
Correct care and maintenance will keep your appliance operating smoothly. Clean regularly as
determined by the amount of use. NOTE: Clean the entire appliance each year and tighten all
hardware on a regular basis (1-2 times a year or more depending on usage). Cleaning should be
done where detergents won’t harm patio, lawn or the like.
Suggested Cleaning Materials
:
Mild dish washing liquid detergent
Hot water
Nylon Cleaning pad
Paper clip
Component Cleaning:
Burner: Use brush to loosen corrosion from burner exterior. Clean clogged gas port holes
with an open paper clip. Replace corroded or damaged burners that would emit excess gas.
For cooking surfaces like pots and pans: Clean the cooking surface with soapy water and a
nylon cleaning pad.
CAUTION
All cleaning and maintenance should only be done when the appliance is cool and with the fuel supply
turned off at the LP tank. DO NOT clean any part in a self-cleaning oven. The extreme heat will
damage the finish.
Fig. 2
Fig. 1
