ST-SP Pag.
41 Rev 02 05/13
UK
3.3.4.2 Necessary Individual Protection Devices
3.3.4.3 Signs Present
The machine is supplied with specific danger and forbidden signs; see
Paragraph 3. 4 – Safety Signs
.
3.3.4.4 Attention warnings during maintenance and demolition Phases
During the maintenance and demolition phases, it is necessary to follow the attention warnings in this paragraph.
Conduct the interventions requested using the standardised work tools (ladders, various tools) and always wearing the
necessary IPD.
The implementation of maintenance and demolition interventions must be performed by qualified, specifically trained staff.
Check that the power supplies are adequately sectioned and that nobody can reactivate them prior to concluding the
requested interventions (use of locks, adequate signs and consolidated work procedures); also check that any residual
energy was discharged before conducting the intervention.
Operate, as much as possible, on the machine and the tubing only after emptying it and before proceeding to restarting,
guaranteeing adequate cleaning of the system.
Obtain the necessary work permits and check all the preparation procedures of the machine for maintenance operations are
correctly conducted.
Use the auxiliary equipment and, however, any other machinery or equipment (electrical or pneumatic) only having
understood the instructions reported in the relative Use and Maintenance Handbook or after specific and formal training.
Do not use, for any reason, petrol, solvents or inflammable fluids to clean parts, but use commercial, approved detergent
that is inflammable and non-toxic.
Do not make changes, transformations or applications to the machine that could prejudice safety, without having obtained
written authorisation from the manufacturer.
Before restarting the machine, check that all the safety devices of the machine were restored.
3.4 Safety signs
Signaling labels are present on the machine, which are indicated in
Table 4
.
Table 4 – Description of the signaling labels present on the machine.
LABEL
DESCRIPTION
A
This label indicates that it is forbidden to remove the safety devices and
protections installed on the machine; it is usually accompanied by the
explicatory writing:
DO NOT REMOVE THE PROTECTION DEVICES
.
B
This label indicates that it is forbidden to perform any intervention (including
lubrication and cleaning) in proximity of moving parts; it is usually
accompanied by the explicatory writing:
DON NOT REPAIR OR REGULATE DURING
MOTION
.
C
This label warns about the danger due to the presence of mobile parts in
proximity of the area in which the machine is positioned.
D
This label warns about the danger due to the presence of warm surfaces in
proximity of the area in which the machine is positioned.
