Rittal DK 7856.530 Скачать руководство пользователя

Страница: 42 / 77

Operations 7

Switched Power Distribution Unit

Setting the IP address:

The Set Ipaddress command sets the TCP/IP
address of the network interface controller.

To set the IP address:

At the Switched PDU: prompt, type set ipad-
dress, followed by the IP address and press En-
ter.

Example

The following command sets the IP address to
12.34.56.78:

Switched PDU: set ipaddress 12.34.56.78<Enter>

Setting the subnet mask:

The Set Subnet command sets the subnet mask
for the network the PT40 will be attached to.

To set the subnet mask:

At the Switched PDU: prompt, type set subnet,
followed by the subnet mask and press Enter.

Example

The following command sets the subnet mask to
255.0.0.0

Switched PDU: set subnet 255.0.0.0<Enter>

Setting the gateway:

The Set Gateway command sets the IP address
of the default gateway the PDU uses to access
external networks.

To set the gateway IP address:

At the Switched PDU: prompt, type set gateway,
followed by the gateway IP address and press
Enter.

Example

The following command set the gateway IP ad-
dress to 12.34.56.1:

Switched PDU: set gateway 12.34.56.1<Enter>

Setting the DNS IP address:

The Set DNS command sets the TCP/IP address
of the Domain Name server (DNS).

To set the DNS IP address:

At the Switched PDU: prompt, type set, followed
by dns1 or dns2 and the Domain Name server’s
IP address. Press Enter.

Example

The following command sets the primary Domain
Name server IP address to 98.76.54.254:

Switched PDU: set dns1 98.76.54.254<Enter>

Displaying network configuration information:

The Show Network command displays TCP/IP,
Telnet, SSH, Web, SSL and SNMP configuration
information.

•

IP address, subnet mask, gateway and DNS IP
addresses

•

Enabled-disabled status and port numbers for
Telnet, SSH, HTTP,SSL and SNMP support

•

HTTP authentication method and SSL access
setting

•

Network status

To display network configuration information:

At the Switched PDU: prompt, type show net-
work and press Enter.

Example

The following command displays the network
configuration information:

Switched PDU: show network<Enter>

Network Configuration

    IP Address:   12.34.56.78  DNS1: 98.76.54.254
    Subnet Mask:  255.0.0.0    DNS2: 0.0.0.0
    Gateway:       12.34.56.1

      Telnet:        Enabled       Port:    23
      SSH:           Enabled       Port: 65535
Auth: Password, Kb-Int
      HTTP: Enabled                Port:    80
Security: BASIC
      SSL:           Enabled

Access: Required
SNMP: Enabled

Network Status

      Link:          Up
      Speed:         100 Mbps
      Duplex:        Full
      Negotiation:   Auto

Содержание DK 7856.530














































































Результаты поиска

Содержание DK 7856.530

Отзывы:

Похожие инструкции для DK 7856.530

Бренды по названию

Популярные бренды

Rittal DK 7856.530, Сборка, установка и эксплуатация

Результаты поиска

Содержание DK 7856.530

Отзывы:

Похожие инструкции для DK 7856.530

Бренды по названию

Популярные бренды