Dok‑Guardian™ HD Safety Barrier
Installation/Service/Owner's Manual
Rite‑Hite
®
16 Publication:
AMEN00033 2019-03-29
OPERATION
Storage Warden
Receiver Warden
STORAGE SIDE WARDEN.
AS LEFT TO RIGHT PULL
RECEIVER SIDE WARDEN.
AS LEFT TO RIGHT PULL
STORAGE SIDE WARDEN.
AS LEFT TO RIGHT PULL
RECEIVER SIDE WARDEN.
AS LEFT TO RIGHT PULL
A1
A2
Left mount unit with Left to Right pull shown
Extend Barrier
1 At the storage warden, grasp the steel handle of the
curtain and walk curtain across the opening
2 Latch the curtain lead bar attached to the end of the
curtain (A1) into the latch bracket (A2) at the opposite
side of the opening
3 Insure the curtain lead bar is fully engaged in latch
bracket
NOTE:
Because the pull force may be up to 50lb [23kg],
perform this operation with straight motions (do not twist
the body)
Store Barrier
1 Grasp the steel handle of curtain and release from the
latch bracket
2 Walk the curtain back to opposite side of the opening
while supporting the curtain (to allow the curtain to
properly roll up)
3 Release the handle only when the curtain and curtain
lead bar are secured inside the storage warden
Figure 8
