Rishabh RISH CON - V, Руководство по эксплуатации

Страница: 38 / 68

PRKAB601
Programming
Power supply
Transducer
Programing cable
Software CD
Transducer
connector
36
3.3 Programming Via optional RS485 (MODBUS)
communication port.
(Refer section 4 for programming through MODBUS)
3.3.1: DIP Switch Setting for Changing Output type
The Transducer output type can be changed from DC
current to DC voltage depending upon user requirement on
site. To change output type user has to set the transducer
output type parameter either to voltage or current along
with DIP switch setting.
The transducer output type parameters can be configured
using one of the three below given methods.
A) PRKAB 601(optional) : Using PRKAB601 through
Transducer programming port (COM) and using PC based
configuration software.