Rishabh RISH CON - V, Руководство по эксплуатации

Страница: 20 / 68

18
& advance to the Input Parameter selection
(section 3.1.5).
Output 2 Type confirmation
Pressing “ Down” key will re-
enter into Output 2 type Edit
mode.
Pressing the “ Up” key will set
the type & advance to
the Input
C h a r a c t e r i s t i c s
s e l e c t i o n
(section 3.1.5).
3.1.5. Input Characteristics setting
3.1.5.1 End value of Input
This screen allows the user to set
the End value of Input.
End value of Input can be set 80%
to 120% of set PT secondary
value.
Pressing the “ Down” key will
enter the “New/Change End
value of Input edit” mode.
Pressing “ Up” key will confirm the present value as End
value of Input and advance to the Start value of Input
selection (section 3.1.5.2).
New / Change End value of Input
(*Denotes that digit will be flashing).
Pressing the “ Down” key will scroll the value of the
Ú
Ù
Note
After Changing Output Type please insure to change DIP
Switch setting (Refer Section 3.3.1). If DIP Switches are
already change then switch ON/OFF Transduce
r.
Ú
Ù
Ú