Rishabh RISH CON - V, Руководство по эксплуатации

Страница: 52 / 68

The Voltage Transducer should
be mounted in a reasonably
stable ambient temperature and
where the operating temperature
0
is within the range 0 to 45 C .
Vibration should be kept to a
minimum and the product should
not be mounted where it will be
subjected to excessive direct
sunlight.
Caution
1. In the interest of safety and functionality this product
must be installed by a qualified engineer, abiding by
any local regulations.
2. Voltages dangerous to human life are present at some
of the terminal connections of this unit. Ensure that all
supplies are de-energised before attempting any
connection or disconnection.
3. These products do not have internal fuses therefore
external fuses must be used to ensure safety under
5.1 EMC Installation Requirements
This product has been designed to meet the certification of
the EU directives when installed to a good code of practice
for EMC in industrial environments, e.g.
1. Screened output and low signal input leads or have
provision for fitting RF suppression components, such
as ferrite absorbers, line filters etc., in the event that RF
fields cause problems.
Note: It is good practice to install sensitive electronic
instruments that are performing critical functions, in
50