Rishabh RISH CON - V, Руководство по эксплуатации

Страница: 30 / 68

(considerd as DC Current).
The Elbow value can be set any
value between set Start value of
Output and End value of Output.
Pressing the “ Down” key will
enter the “ New/Change Elbow
value of the Output 1edit” mode.
Pressing “ Up” key will set the
present value as Elbow value of the Output 1 and advance to
the Output 2 parameter selection (section 3.1.6.2).
New / Change Elbow value of the Output 1
(*Denotes that digit will be
flashing).
Pressing the “ Down” key will
scroll the value of the first digit
from 0 through to 1, the value will
wrap from 1 round to 0 depending
on the set End value of Output.
Pressing the “ Up” key will
advance the operation to the next
digit and set the first digit, in this case to “1”.
Enter New / Change Elbow value of the Output 1, first digit
entered, prompting for second digit.
(*Denotes that digit will be
flashing).
Pressing the “ Down” key will
scroll the value of the second
digit from 0 through to 9, the
value will wrap from 9 round to
0 depending on the set End value
Ú
Ù
Ú
Ù
Ú
28