COnTrOl Panel OPeraTIOns
9
user preferenCes
There are several aspects of spa operation that you
can customise using the User Preferences sub menu
from the main control panel.
Press tempº + or tempº− then variable speed
drive (vsp) then light (each press within 3
seconds). At this point if
USr
is not showing on the
display press tempº + or tempº− until
USr
appears.
Then press vsp to enter the User Preferences sub
menu.
Once in the User Preferences sub menu press
tempº + or tempº− or to cycle between these
settings:
Sr
- suppress reminders
When set to
Sr.Y
reminders are never displayed on
the panel. When set to
Sr.n
reminders are displayed
on the control panel periodically.
tc
- temperature in °C (Celsius)
When set to
tc.Y
temperatures are displayed in
°C (Celsius). When set to
tc.n
temperatures are
displayed in °F (Fahrenheit).
24
- 24 hour time display
When set to
24.n
time is displayed as a 12 hour
(am/pm) clock. When set to
24.Y
time is displayed
as a 24 hour clock.
cc
- Clean up Cycle duration
When set to
cc.D
clean up cycles are disabled.
When set to
cc.1
through
cc.4
the number
indicates how many hours each clean up cycle
will run.
edItInG
user preferenCes
View the setting you wish to adjust (see User
Preferences).
The left 2 characters (before the decimal point) tell you
what setting you are viewing or editing. The character
after the decimal point tells you the value of that setting
(for example:
.Y
for yes,
.n
for no).
Press
vsp
to switch editing on and the value will flash.
Press
vsp
once again to turn editing off and it will stop
flashing.
When editing the value (when it is flashing) use the
tempº + or tempº−
to change the value to the setting
you want. After you have changed the value press
vsp
again to save the change - the value will then stop
flashing.
If you don’t make any changes during editing it will time
-out after 30 seconds. If you press light to back out of
the menu or pause long enough for it to time-out while
a value is flashing, the changes you were making to that
setting won’t be saved. However, changes you made to
previous settings will be saved.
auxIlIary Control panel
The auxiliary control panel operates the Variable
Speed Drive (VSP): ON/OFF function and jet speed.
The Variable Speed Drive must first be turned on
at the Main Control Panel and then turned on at
the Auxiliary Control Panel. The counter current will
then start up and go to power level 1. You can then
increase the counter current speed 1-10 and then
back down 10-1.
rIsK of damaGe warnInG:
NEVER turn the Variable Speed Drive off at the Main
Control Panel without first switching it off at the
Auxiliary Control Panel.
