Ripley ODM OTDR 800 Скачать руководство пользователя страница 19

PAGE 19

M-UM041-04 OTDR 800 6/2020

LINEARITY

± .05 dB/dB

MEMORY CAPACITY

~ 40,000

MEMORY TYPE 

Internal

POWER SUPPLY / CHARGER

Universal

BATTERY TYPE / LIFE

Li-ion / 6 Hours (Typical)

STORAGE TEMPERATURE

-20° to 60° C

OPERATING TEMPERATURE RANGE

-10° to 50° C

DIMENSIONS (WITHOUT RUBBER BOOT)

6.25″ L x 4.125″ W x 1.875″ H  (159 mm L x 105 mm W x 48 mm H)

WEIGHT

1.5 lb (0.7 kg)

COMMUNICATIONS PORTS

USB / Bluetooth®

CONNECTOR STYLES

Choice of FC or SC

ACCESSORIES INCLUDED

U.S. Choice of FC or SC Adapters; Android™ Application, Windows® 

Compatible Software, Rubber Boot, Hard Carry Case, Manual

LASER SAFETY

CLASS 1 SAFETY PER FDA/

CDRH AND IEC-825-1 REG.

Ripley Tools reserves the right to change specifications without notice.

11.2  VFL Specifications

EMITTER TYPE

Laser Photo Diode 1100 - 1700 nm InGaAs -70 to +9 dBm with Interchangeable FC Adapter

WAVELENGTH

650 nm ± 5 nm

CONNECTOR TYPE

2.5 mm Universal

OUTPUT POWER

1 mW Max.

LASER SAFETY 

CLASS II FDA21 CFR1040.10 & 1040.11 

IEC 825-1: 1993

Ripley Tools reserves the right to change specifications without notice.

Chapter 12: Repair & Warranty

12.1  Repair Information

If repair is required, simply call the factory at 603-524-8350 for return instructions and a RMA number.

12.2  Warranty Information

This product, including all mechanical, electrical, and optical parts and assemblies are unconditionally warranted to be free of 

defects in workmanship and material for a period of two years from the date of delivery.
This warranty does not apply to expendable parts such as batteries or optical panel connectors, nor to any instrument or 

component which has been subjected to misuse, alteration, or fiber connector damage. It is the customer’s responsibility to 

understand all the instructions and specifications prior to operating this instrument. This warranty does not extend to any loss or 

damage consequent to the failure of the warranted product.

Содержание ODM OTDR 800





















Отзывы: