Rion VM-56 Скачать руководство пользователя страница 65

Страница: 65 / 180

Reading the Display

Display / I/O

This screen sets the type of output signal etc.

Use the

keys to select [Display / I/O] and press the MENU/

ENTER key. The display / I/O screen appears.

Each item of the display / I/O screen is selected using the

key.

Pressing the PAUSE/CONT key switches back to the menu list screen.

Pressing the START/STOP key switches back to the measurement screen.

Time-Level graph Time Scale

Displays the screen to select the time scale of the time-level graph.

Select [Time-Level graph Time Scale] and press the MENU/ENTER key.

The Time-Level graph Time Scale setting screen appears.

Use the

keys to select the time scale (20s, 1min, 2min) and press

the MENU/ENTER key.

Output

Displays the screen to select the signal output from the OUTPUT con-

nectors of the unit.

Select [Output] and press the MENU/ENTER key. The output screen

appears (see page 72).

Comparator

Displays the screen to set the comparator signal output (open collector

output can be used to control external equipment) from the I/O connector

of the unit.

Select [Comparator] and press the MENU/ENTER key. The comparator

screen appears.

Содержание VM-56





















































































































































































Результаты поиска

Содержание VM-56

Отзывы:

Rion VM-56, Инструкция по эксплуатации, Страница: 65 / 180

Результаты поиска

Содержание VM-56

Отзывы: