Rion VM-56, Инструкция по эксплуатации, Страница: 127 / 180

115
Serial Interface
OUTPUT Band
Output frequency characteristic
Setting output frequency characteristic
Setting command OUTPUT Band, p1
Parameter p1= “not-weighed”
(In the case of Vel. : Building Damage)
p1= “Interlock”
(In the case of Vel. : Human Exposure)
p1= “Selected frequency band” (only RT mode)
Request command OUTPUT Band?
Response data d1
Returned value Same as for setting command
Comparator Node Number
Comparator node number
Setting of Comparator Node Number
Setting command Comparator Node Number, p1
Parameter p1= “Off”
p1= “1”
p1= “2”
p1= “3”
p1= “4”
p1= “5”
p1= “6”
Request command Communication Node Number?
Response data d1
Returned value Same as for setting command