Rion VM-56 Скачать руководство пользователя страница 59

Страница: 59 / 180

Reading the Display

Battery Type

Displays the screen to select the type of battery used for the unit. The

battery power corresponding to the selected battery is displayed on the

measurement screen.

Select [Battery type] and press the MENU/ENTER key. The battery type

screen appears.

Use the

keys to select the battery type (Alkaline, Ni-MH [Nick-

el-metal hydride]) and press the MENU/ENTER key.

Card Format (can only be selected when SD memory card is
inserted)

Formats the inserted SD memory card.

Select [Card Format] and press the MENU/ENTER key. The confi rmation

screen appears.

Select [YES] and press the MENU/ENTER key to format the card.

Select [NO] and press the MENU/ENTER key when not formatting the

card.

Free space / SD card capacity

Displays the free space and the memory capacity of the inserted SD

memory card. The both free space and memory capacity are read by the

automatic operation, and cannot be changed.

Note

If the following operation is performed while the USB
cable is connected, the free space will not be displayed
correctly. In this case, cycle the power to the unit, or
remove the SD memory card and insert it again.

* Have this unit recognized as a removable disk,

move the data to a computer and then move the
data back to the unit.

Even when a new SD memory card is inserted, the
remaining capacity may sometimes be shown as 99%
rather than 100%.

Содержание VM-56





















































































































































































Результаты поиска

Содержание VM-56

Отзывы:

Rion VM-56, Инструкция по эксплуатации, Страница: 59 / 180

Результаты поиска

Содержание VM-56

Отзывы: