Rion VM-56 Скачать руководство пользователя страница 40

Страница: 40 / 180

Preparations

Measurement in a dark location

Pressing the LIGHT key will turn on the display backlight, for easier reading

in a dark location. The backlight operation pattern can be controlled via a

menu, as follows.

1. Press the MENU/ENTER key to bring up the menu list screen.

2. Use the

keys to select [System] and press the MENU/

ENTER key. The system screen appears.

3. Use the

keys to select [Backlight/LCD Settings] and press the

MENU/ENTER key. The backlight/LCD settings screen appears.

4. Use

the

keys to select [Backlight Auto Off] and press the MENU/

ENTER key. The backlight auto off screen appears.

5. Use the

keys to select the automatic turn-off interval (30 sec,

3 min, Continue) and press the MENU/ENTER key.

6. Use the

keys to select [Backlight brightness] and press the

MENU/ENTER key. The level of brightness screen appears.

7. Use the

keys to select the level of brightness (level 1 to level

4) and press the MENU/ENTER key. (level 1 is dark, and level 4 is

bright.)

8. Press the START/STOP key to return to the measurement screen.

To turn the backlight off before the automatic turn-off point, press the LIGHT

key.

The [level 4] setting for backlight brightness will reduce battery life by about

30 percent, and the [level 1] setting by about 5 percent.

Note

When there is only one segment (red) on the battery
status indicator, the display backlight does not turn on.

Содержание VM-56





















































































































































































Результаты поиска

Содержание VM-56

Отзывы:

Rion VM-56, Инструкция по эксплуатации, Страница: 40 / 180

Результаты поиска

Содержание VM-56

Отзывы: