Rion NL-42A Скачать руководство пользователя страница 70

Страница: 70 / 154

Reading the Display

Backlight/LCD Settings

Displays the screen to set the function of the backlight and the LCD of

the unit.

Select [Backlight/LCD Settings] and press the MENU/ENTER key. The

backlight/LCD settings screen appears (see page 27).

Battery Type

Displays the screen to select the type of battery used for the unit. The

battery power corresponding to the selected battery is displayed on the

measurement screen.

Select [Battery type] and press the MENU/ENTER key. The battery type

screen appears.

Use the

keys to select the battery type (Alkaline, Ni-MH[Nickel-metal

hydride]) and press the MENU/ENTER key.

Card Format (can only be selected when SD memory card is inserted)

Formats the inserted SD memory card.

Select [Card Format] and press the MENU/ENTER key. The confi rmation

screen appears.

Press the MENU/ENTER key to format the card.

Free space / SD card capacity

Displays the free space and the memory capacity of the inserted SD

memory card. The both free space and memory capacity are read by the

automatic operation, and cannot be changed.

Note

If the following operation is performed while the USB
cable is connected, the free space will not be displayed
correctly. In this case, cycle the power to the unit, or
remove the SD memory card and insert it again.

* Have this unit recognized as a removable disk,

move the data to a computer and then move the
data back to the unit.

Содержание NL-42A



























































































































































Результаты поиска

Содержание NL-42A

Отзывы:

Rion NL-42A, Инструкция по эксплуатации, Страница: 70 / 154

Результаты поиска

Содержание NL-42A

Отзывы: