Rion NL-42A, Инструкция по эксплуатации, Страница: 107 / 154

89
Store Operation
6. Specify the store name (number of four digits: when SD memory
card is inserted).
6-1. Use the keys to select [Store Name] and press the MENU/
ENTER key. The store name screen appears.
6-2. Use the keys to select the fi rst two digits, and use the
keys to set the value.
6-3. Use the keys to select the fi nal two digits, and use the
keys to set the value. Then press the MENU/ENTER key.
7. Set the measurement time.
7-1. Use the keys to select [Measurement Time] and press the
MENU/ENTER key. The measurement time screen appears.
7-2. Use the keys to select the measurement time (10s, 1min,
5min, 10min, 15min, 30min, 1h, 8h, 24h, Manual) and press the
MENU/ENTER key.
7-3. When “Manual” is selected, [User setting] is displayed on the store
screen. Select [User setting] and press the MENU/ENTER key.
7-4. The measurement time setting screen appears. Set arbitrary mea-
surement time (At most for 24 hours).
8. Press the START/STOP key to return to the measurement screen.
9. Specify the store address.
The currently selected address is shown on the screen. If the address
is shown in red, it already contains data. Take care not to overwrite
data that you want to keep.
The keys can be used to specify the address in the range from
0001 to 1000. Any data already present in the selected address will
be overwritten (erased and replaced by the new data). For informa-
tion on how to check existing data, see the section “Recalling stored
data” on page 90.