Rion NL-42A Скачать руководство пользователя страница 36

Страница: 36 / 154

Preparations

SD memory card and program cards

Measurement data can be stored on an SD memory card for use and further

processing in a computer. Optional program cards can also be used for installing

software into the unit to expand the measurement functions of the unit.

Inserting a card

Important

Make sure that power is OFF before inserting
or removing a card.

Take care to insert the SD memory card with
correct orientation.

If the SD memory card is removed while data is
being read or written to the card, the data may
be destroyed.

Use SD memory cards provided by Rion. The
performance of other cards is not guaranteed.

Note that we assume no responsibility for any
damage or loss of stored measurement data.

1. Open the bottom cover of the unit.

2. Insert the SD memory card into the card slot on the bottom of the

unit with the label of the card facing up. Push the card in until it is

locked in place.

3. To remove the card, push the card a bit further in, the card is released

and pops out of the card slot.

SD card slot

SD memory card

By sliding this switch in

the arrow direction, you

can write-protect the

card.

Label side should

face up

Содержание NL-42A



























































































































































Результаты поиска

Содержание NL-42A

Отзывы:

Rion NL-42A, Инструкция по эксплуатации, Страница: 36 / 154

Результаты поиска

Содержание NL-42A

Отзывы: