Rinnai Prestige Close Coupled Systems, Руководство по эксплуатации и установке

Страница: 14 / 48

Rinnai Australia - 12 - Solar Close Coupled Operating / Installation Manual - Issue 7 - 16/9/10
COLLECTOR SPECIFICATIONS
Table 4 - Collectors Specifications
GAS BOOSTER SPECIFICATIONS
* Table 5 - Gas Boosters Specifications
Model Name S20 S26
Boost Capacity:
- L/min. @ 20°C rise
- L/min @ 25°C rise (L/min)
20
16 26
24
Maximum Rated Flow: (L/min) 20 26
Minimum Supply Pressure for Maximum rated flow:
(1)
(kPa)
120 200
Minimum Flow for Operation: (L/min) 2.4 2.4
Frost Protection: Yes Yes
Gas Consumption (Maximum / Minimum): (MJ/Hr.) 125 - 18 188 - 23
Star Rating (AS 4552 - 1998):
5.5 5.0
Hot Water Delivery Temperature:
(2)
60°C 60°C
Dimensions: Height x Width x Depth: (mm)
530 x 350 x 194 530 x 350 x 194
Weight: (kg) 15 21
(1)
- Units will operate at lower pressures but the rated flow with not be achieved.
(2)
- Gas boosters for Solar hot water applications should be preset to deliver a minimum temperature of 60°C.Gas boosters factory pre
set to 60°C or 65°C will be marked as such. If there are no temperature markings on the water heater, on site conversion is required.
Other models of Rinnai Infinity Water Heaters (including internal units) can be converted to solar gas boosters. Contact Rinnai for details.
CHARACTERISTICS
Enduro / Equinox
(SP200A) or
(SP200A FTC)
Excelsior
(EXT OR EXT FTC)
TYPE Flat plate Flat plate
CONSTRUCTION
- Waterways Copper Copper
- Absorber Aluminium Copper
- Selective Surface High Performance Sputtered Titanium Oxide
Maximum Operating Pressure
Casing Material
Overall Dimensions
(L x W x H) (mm)
1940 x
1025 x
80
1964 x
1047 x
81
Weight empty
(STD/FTC) (kg).
33 / 35 35 / 38
Water volume (Litres) 1.3 1.5
Number risers 8 10
Potential Solar Output at
PTR relief conditions (kW)
MODEL NUMBERS AND SPECIFICATIONS
Frost Protection
* Standard version - no frost protection
FTC Version - Frost Protection to -5°C
* FOR MORE INFORMATION ON FROST PROTECTION
REFER TO WARRANTY BOOKLET
850 kPa
Aluminium
1.25
SPECIFICATIONS