Rinnai Prestige Close Coupled Systems, Руководство по эксплуатации и установке

Страница: 22 / 48

Rinnai Australia - 20 - Solar Close Coupled Operating / Installation Manual Issue 7 - 16/9/10
STANDARD INSTALLATION CONTINUED
Fastening (Collectors to a Tiled Roof)
This installation is not suitable for in cyclonic areas. For further details, please
contact your local Rinnai Solar distributor.
•
Position the lower collector mounting rail
assembly so that the rail is angled to ensure
the collectors have an 8 mm / collector rise.
•
Attach the collector mounting straps to the
rafter or truss under the tiles as shown in
Figure 11.
Figure 11 - Mount Lower Collector Rail
•
Place the collector(s) onto the roof above the
lower rail. If more than one collector is being
installed then join them together using the
compression fittings supplied.
•
Push down on the collector retainers to clamp
the collector and tighten the nuts as shown in
Figure 12.
Figure 12 - Mount collector on Roof
•
Position the upper collector rail above the
collectors. Push down on the retainers to
clamp the collector and tighten the nuts.
•
Attach the collector mounting straps to the
rafter or truss under the tiles as shown in
Figure 13.
Figure 13 - Attach Mounting Straps
•
Replace the tiles and ensure the collector is
secure as shown in Figure 14.
Figure 14 - Replace Tiles
NOTE
Nail strap to rafter
Tiles removed
Nail strap
to rafter
Tiles removed
INSTALLATION OF SOLAR COLLECTORS & CYLINDERS