Rinnai POLO POLOCOOL Whisper страница 7 Скачать руководство пользователя

Страница: 7 / 24

WINDOW SLIDER KIT INSTALLATION

(Fig. 9, Fig. 10, Fig. 11 and Fig. 12)

The window slider kit has been designed to fit most standard "vertical" and "horizontal" window applications. It may

be necessary for you to improvise/modify some aspects of the installation procedures for certain types of

windows. Some window types may require the use of cardboard fillers and/or duct tape to install.

Please refer to illustration for minimum and maximum window openings.

Min. 67.5 cm

Max. 123 cm (to last securing hole)

Min. 67.5 cm

Max. 123 cm (to last securing hole)

Min. 50cm

Max. 96.5cm

Additional complete window kits may be purchased from POLO to enable pre-installation in windows in other rooms.

Window slider length

Gaps can be sealed using

cardboard or plastic and duct tape.

Window (Door) slider height

Standard door height 210cm.

Gap can be sealed using

cardboard and duct tape.

Additional window sliders

can also be purchased to fill

this gap.

WINDOW SLIDER INSTALLATION

The window slider has been designed to fit most standard “vertical” and “horizontal” window applications. It may be

necessary for you to improvise/modify some aspects of the installation procedures for certain types of windows. Some

window types may require the use of cardboard or plastic fillers and/or duct tape to install. Additional complete window

kits may be purchased from POLO to enable pre-installation in windows in other rooms. Window sliders may be cut to length

to fit different size windows.
Please refer to illustration for minimum and maximum window openings.

Hose inlet must be right way

around to ensure window is

hard up against slider

Gaps can be sealed using cardboard or

plastic and duct tape or foam seals.

Min. 67.5cm

Max. 123cm

Содержание POLO POLOCOOL Whisper

























Результаты поиска

Содержание POLO POLOCOOL Whisper

Отзывы:

Похожие инструкции для POLO POLOCOOL Whisper

Бренды по названию

Популярные бренды

Rinnai POLO POLOCOOL Whisper, Руководство пользователя

Результаты поиска

Содержание POLO POLOCOOL Whisper

Отзывы:

Похожие инструкции для POLO POLOCOOL Whisper

Бренды по названию

Популярные бренды