8
OPERATING FROM THE CONTROL PANEL
Press ON/OFF button to turn appliance on
COOL Operation
• Press the “MODE” button until the “COOL” indicator light comes on.
• Press the ADJUST buttons “+” or “-” to select your desired room temperature. The temperature can be set within a range of
17°C~30°C/62°F~88°F(or 86°F).
• Press the “FAN SPEED” button to choose the fan speed.
DRY operation
• Press the “MODE” button until the “DRY” indicator light comes on.
• Under this mode, you cannot select a fan speed or adjust the temperature. The fan motor operates at LOW speed. --Keep windows and doors
closed for the best dehumidifying effect.
• Set the humidity level between 35-85% RH. Please install the rear exhaust hose for best dehumidification effect and connect to the window slider.
However the unit can still be used without the rear exhaust hose if required.
• When you set the air conditioner in AUTO mode, it will automatically select cooling, or fan only operation depending on what temperature you have
selected and the room temperature.
• The air conditioner will control room temperature automatically round the temperature point set by you.
• Under AUTO mode, you can not select the fan speed.
FAN operation
• Press the “MODE” button until the ”FAN “ indicator light comes on.
• Press the “FAN SPEED” button to choose the fan speed. The temperature can not be adjusted and room temperature is shown in the display.
• Do not install the exhaust hose.
TIMER operation
• When the unit is on, press the Timer button will initiate the Auto-off stop program, the TIMER OFF indicator light illuminates. Press the UP or
down button to select the desired time. Press the TIMER button again within 5 seconds, the Auto-on start program is initiated. And the TIMER ON
indicator light illuminates. Press the up or down button to select the desired Auto-on start time.
• When the unit is off, press the Timer button to initiate the Auto-on start program, press it again within five seconds will initiate the Auto-off stop program.
• Press or hold the UP or DOWN button to change the Auto time by 0.5 hour increments, up to 10 hours, then at 1 hour increments up to 24 hours.
The control will count down the time remaining until start.
• The system will automatically revert back to display the previous temperature setting if there is no operation in a 5 seconds period.
• Turning the unit ON or OFF at any time or adjusting the timer setting to 0.0 will cancel the Auto Start/Stop timer program.
• When the malfunction occurs, the Auto Start/Stop timed program will also be cancelled.
SLEEP/ECO operation
• Press this button, the selected temperature will increase (cooling) by 1°C/2°F(or 1°F) 30 minutes. The temperature will then increase (cooling)
by another 1°C/2°F(or 1°F) after an additional 30 minutes. This new temperature will be maintained for 7 hours before it returns to the originally
selected temperature. This ends the Sleep/Eco mode and the unit will continue to operate as originally programmed. NOTE: This feature is una-
vailable under FAN or DRY mode.
OTHER FEATURES
WAIT 3 MINUTES BEFORE RESUMING OPERATION After the unit has stopped, it can not be restarted operation in the first 3 minutes. This is to
protect the unit. Operation will automatically start after 3 minutes.
AIR FLOW DIRECTION ADJUSTMENT
The louver can be adjusted automatically. Adjust the air flow direction automatically :
• When the Power is ON, the louver opens fully.
• Press the SWING button on the panel or remote controller to initiate the Auto swing feature. The louver will swing up and down automatically.
• Please do not adjust the louver manually.
NOTE:
Only one mode of operation is available at any time.
