13
OPERATING FROM THE REMOTE CONTROL
HOW TO USE THE ADVANCED FUNCTIONS
SLEEP Function
The
SLEEP
function is used to decrease energy use while you sleep (and don’t
need the same temperature settings to stay comfortable). This function can
only be activated via remote control.
Note:
The SLEEP function is not available in FAN or DRY mode.
SWING Function
Used to stop or start louvre movement and set the desired up/down air flow
direction. The louvre changes 6 degrees in angle for each press (some models
without). If you continue pushing more than 2 seconds, the louvre auto swing
feature is activated.
SHORTCUT Function
Used to restore the current settings or resume previous settings.
Push this button when remote controller is on, the system will automatically
revert back to the previous settings including operating mode, setting
temperature, fan speed level and sleep feature (if activated).
If pushing more than 2 seconds, the system will automatically restore the current
operation settings including operating mode, setting temperature, fan speed level
and sleep feature (if activated).
