5
INSTALLATION
SELECTION OF INSTALLATION LOCATION (Fig.3)
Place the portable air conditioner in a flat location where the air inlets
and outlets cannot be covered up. Place the unit no less than 50cm away
from a wall or other obstacle. In addition a minimum 50cm clearance is
required from all faces of the air conditioner including the rear face.
H
ose
outlet
H
ose
H
ose
inlet
ASSEMBLY OF EXHAUST HOSE, HOSE INLET, HOSE OUTLET AND WINDOW SLIDER
(a)
Press one end of the exhaust hose into the hose outlet which automatically clamps by the three plastic buckles. Lift
buckles to remove.
(b)
Press the other end of the exhaust hose into the hose inlet which automatically clamps by the three plastic buckles.
Lift buckles to remove.
(c)
Install the hose outlet into the window slider by lining up the 4 plastic buckles with the cutouts in the window slider
Ensure the 4 plastic buckles are pushed all the way into the window slider to ensure a firm fit. Press buckles to
remove from window slider.
(d)
Install the hose inlet into the appliance by pushing into the lower groove of the air outlet
on the unit while the hook on the hose inlet is aligned with the hole seat of the air outlet.
Lift hose inlet upwards to remove. See sketches on right.
(e)
When mounting try and keep the air exhaust hose horizontal and do not extend its length
by attaching it to another hose as this reduces the cooling capacity of the appliance.
(f)
Place the hose outlet to the nearest window. The length of the air exhaust hose is between
330mm-1450mm approx. Use the mini
m
um length when working and keep it as straight as
possible.
Fig. 3
50cm clearance
at back to
allow for air
outlet hose.
50cm clearance
required for air inlet.
50cm
50cm
50cm
W
indow
slider
U
se bolt to fasten 2 parts of the window slider once they are adjusted to the proper length
Installation of
hose inlet into
appliance
50cm
Do not
overextend
50cm
