Rinnai
12
Commercial Manifold Pack OIM
NOTE
Only Rinnai Flueing systems can be used with Internal Water Heaters. Non-Rinnai Flueing
systems are not certified and will not be covered under warranty.
For all further information on internal flueing, please refer to separate Flueing Manual supplied with flueing
components.
MULTIPLE FLUE TERMINALS
Dimension 'H' in AS/NZS 5601 Figure 6.2 does not apply when multiple Rinnai external water heaters of the same
model are installed on the same vertical face with flue terminals at the same height (i.e. side by side). Under these
conditions appliances can abut each other as shown below:
Before commencing installation, ensure you refer to the content of all other Operation / Installation manuals
supplied with the appropriate model Rinnai Continuous Flow Water Heater or Rinnai Flueing Systems.
INSTALLATION INSTRUCTIONS
