Rinnai
2
DD FP Solar Pre Heat System OIM
This appliance must be installed in accordance with:
• Manufacturer’s Installation Instructions
• Current AS/NZS 3000, AS/NZS 3500 & AS/NZS 5601
• Plumbing Code of Australia (PCA)
• Local Regulations and Municipal Building Codes including local OH&S
requirements
The solar hot and cold pipes between the solar storage tank and the solar collector(s)
must be suited to the high water temperatures and pressures that may occur. Fittings
used to join these pipes must use metallic materials to achieve sealing. Plastic pipe
and fittings must not be used as they are not suitable for the high temperatures and
pressures that may occur.
Failure of plastic pipe and/or fittings can lead to the release of high temperature water
and cause severe flooding and water damage.
This appliance must be installed, maintained and removed by an Authorised Person.
For continued safety of this appliance it must be installed and maintained in accor-
dance with the manufacturer’s instructions.
Not suitable as a pool or spa heater
AS/NZS 2712
Lic No.1849
SAI Global
Congratulations on the purchase of your Rinnai Solar Hot Water System. We trust you will have many years of
comfort and enjoyment from your system.
IMPORTANT
BEFORE USING THIS APPLIANCE
Before proceeding with the operation or installation read this manual thoroughly and gain a full
understanding of the appliance, to ensure safe and correct use.
