Rimage PrismPlus!, Руководство пользователя, Страница: 20 / 144

17 110635_J
Maintain the Prism Printer
Clean the Print Head
Clean the print head at every ribbon change, or more often if streaks start to appear or the ribbon has torn.
Required tools # :
Prism cleaning kit (PN 210555-001)
•
A disc
•
99% Isopropyl alcohol
•
Cotton swabs
•
Prepare the 1. Prism .
Power off the a. Prism .
Remove the b. top cover .
Remove the c. ribbon . Refer to Change the Print Ribbon on
page 19.
While pressing and holding the
d. operator button , power
on the Prism.
When the disc not present indicator light flashes, release
e.
the operator button .
Prepare the 2.
cleaning pad
.
Remove the a. adhesive backing from the cleaning pad.
The cleaning pad is available in the cleaning kit.
Attach the
b. cleaning pad to the top of a disc .
Clean the 3. print head .
Place the a.
cleaning pad with the attached disc
on the
printer tray.
Press the
b. pad down over the sensor.
Place 5 drops of c. isopropyl alcohol on the cleaning pad.
Press the d. operator button to close the printer tray and
start the cleaning cycle. When the cleaning cycle is
complete, the printer tray opens.
If necessary, repeat step d.
e.
Remove the f. cleaning pad with attached disc .
Clean the front two ribbon guides. 4.
Apply isopropyl alcohol to a clean a. cotton swab .
Run the swab against a ribbon guide to clean it. b.
Repeat steps a – b for the second ribbon guide. c.
Prepare the 5. Prism for use.
Power off the a. Prism .
Reinstall the b. ribbon .
Replace the c. top cover .
Note: If the printing pad on the tray becomes wet, allow the printing pad to completely dry before using the
Prism.
Power on the d. Prism .
The Prism is ready for use.
Press Pad Down
Over Sensor
Cleaning Pad with
Attached Disc
Front Ribbon
Guides
Cleaning Pad
Cleaning
Solution
English