Rimage PrismPlus!, Руководство пользователя, Страница: 15 / 144

12 110635_J
Rimage Prism Plus! User Guide
Configure the 5. Prism driver options .
Right-click on the a. Printer icon .
Select b. Properties . The Rimage Perfect Image Printer PF Properties window opens.
On the c. Device Settings tab:
Select the type of i. installed ribbon . A monocolor ribbon is shipped with new Prism printers.
Note: The Double Print feature that is available with monocolor ribbons allows you to print the same label
twice on the disc. If you would like the printed areas on your discs to have more density, enable Double
Print. Using Double Print consumes more ribbon.
Change the ii. Master Print Strobe to achieve the best print results.
350 ms for monocolor
•
425 ms for color
•
On the d.
Advanced
tab:
If the Prism is being used as a standalone printer or is attached to an AutoPrinter, select i. Spool print documents
so program finishes printing faster .
Make sure the ii. Enable advanced printing features box is clear.
Verify the e. USB port selection :
Select the i.
Ports
tab.
Note: The USB port selected is the port that the driver attempts to use. This verifies whether this port is the
correct port for the printer.
On the Prism printer, press the ii. operator button to open the tray.
Place a iii. disc on the printer tray.
Press the iv. operator button to close the tray.
Select the v. General tab.
Select vi. Print Test Page . If the USB port selected is correct, a test image prints on the disc.
If the USB port is not correct, repeat steps i–vi, with a different USB port selected, until the test is successful. vii.
Important!
-
If you try multiple USB ports before the test successfully prints, be sure to delete the extra jobs
in the print queue.
After a test image successfully prints, select viii. OK .
The driver installation is complete.
English