Riland CUT 100GT, Руководство пользователя, Страница: 6 / 20

6
The gas and fumes are harmful to health, please wear protective device
according to regulations.
˜
Wear exhaust equipment and breathe preventive facilities to prevent gas poisoning or choke.
˜
Use suggested part exhaust equipment and breathe preventive facilities to prevent hurt or
poisoning by gas and other powder, please.
˜
To prevent oxygen-deficiency, air out the gas-filled room which is full of CO
2
and argon on the
bottom, when operating on trunks, boilers, cabins, etc.
˜
Please accept
the supervisor’s inspection when operating in narrow space. Air the room and
wear breathe preventive facilities.
˜
Never operate in degrease, washing or spray space.
˜
Using breathe preventive facilities when cut shielded steel for it will cause poisonous dust and
gas.
The arc, spark, residue and noise are harmful to health, please wear
protective appliance.
˜
Eye protection against arc is recommended when cutting or supervise cutting.
˜
Please wear preventive spectacles.
˜
Operator’s gloves, operator’s goggles, long sleeve clothes, leather apron, and other standard
protection equipments must be worn for cutting operation.
˜
A screen to protect other people against the arc must be set in the cutting place.
Please follow the notes below to avoid gas cylinder toppling over or
broken.
˜
Use the gas cylinder correctly.
˜
Use the equipped or recommended gaseous regulator.
˜
Read the manual of gaseous regulator carefully before using it, and pay attention to the safety
notes.
˜
Fix the gas cylinder with appropriative holder and other relative parts.
˜
Never put the cylinder under high temperature or sunshine environment.
˜
Keep your face away from the gas cylinder exit when opening it.
˜
Put on the gas shield when it is not used.
˜
Never put the torch on the gas cylinder. The electrode cannot meet the gas cylinder.
Any touch of the switch part will cause injury, please note the
following.
˜
Never use the machine when the enclosure is off.
˜
Install, operate, check and maintain the machine by professional person.
˜
Keep your fingers, hair, clothes etc. away from the switch parts such as the fan.