Riland CUT 100GT, Руководство пользователя, Страница: 5 / 20

5
Please follow the rules below to avoid heavy accidents.
˜
Never use the equipment to do other things but cutting.
˜
Follow related regulations for the construction of the input-driven power source, choice of place,
usage of high-pressure gas, storage, configuration, safe-keeping of workpiece after cutting and
disposal of waste, etc.
˜
Nonessentials do not enter the cutting area.
˜
People using heart pacemaker is not allowed to get close to the plasma cutting machine or area
without doctor’s permission. The magnetism created by energizing the plasma cutting machine
can have a bad effect to the pacemaker.
˜
Install, operation, check and maintain the equipment by profession personnel.
˜
Understanding the contents of the user manual for safety.
Please follow the rules below to avoid electric shock
。
˜
Keep away from any electric parts.
˜
Earth the machine and workpiece by professional personnel.
˜
Cut off the power before installation or checking, and restart 5 minutes later. The capacitance is
chargeable device. Please ensure it has no voltage before start again even if the power source
is cut off.
˜
Do not use wire with inadequate section surface or damage insulation sleeve or even exposed
conductor.
˜
Do ensure well isolation of wire connection.
˜
Never use the device when the enclosure is removed.
˜
Never use broken or wet insulation gloves.
˜
Use firenet when work at high position.
˜ Check and maintain regularly, don’t use it until the broken parts are fixed well.
˜
Turn off the power when not in used.
˜
Follow the national or local related standard and regulations when using the DC plasma cutting
machine at narrow or high position.
Please follow the below notes to avoid fire and explode, etc.
˜
No combustible in cutting area.
˜
Keep off combustible when cutting.
˜
Keep hot workpiece after cutting away from flammable gas.
˜
Do move away the combustible around when cut the dooryard, ground and wall.
˜
The wire connection of base metal should be as close to the cutting place as possible.
˜
Never cut those facilities with gas pipe or airtight slot.
˜
Put fire extinguisher around the cutting area to prevent fire.