|7
EN
6
Temperature control
With PLUS and MINUS, you can select a baking compartment
temperature between 130 °C and 340 °C�
Baking mode
Su 08.12.2019
15:55
Heat up
Temperature 220°C
Tip
After ignition, the baking compartment heats up to 180 °C for
approx� 30 minutes�
Safety instruction
Use the protective glove included in the scope of delivery for
handling when baking - risk of burns!
Cooking at low temperatures
To cook at low temperatures, lower the air recirculation flap on
the rear of the oven� Keep the Minus button pressed for approx� 2
seconds to set a baking compartment temperature of 130 - 150 °C�
After baking, return the air recirculation flap to its original position
(up)�
Baking compartment lighting
The baking compartment lighting is lit during the entire baking
process� After baking, switch to another operating mode to
deactivate the light�
Tip
We recommend that defective lighting be replaced by a specialist�
Safety instruction
Attention: Electrical voltage - disconnect the power plug before
working on the device!
Only
use a
230 V lamp
from the original RIKA spare parts range� (1
lamp included in the delivery�)
When
12 V / 24 V
lamps are used, there is a
risk of explosion
of the
light source!
Do not operate without protective glass!
Replace broken protective glass immediately!
Heating up without electrical ignition
If the ignition cartridge of the appliance should fail, firelighters can
be used to ensure an emergency operation� First, start the stove
as usual� Wait for the cleaning cycle and for the grid to tip� Then
open the firebox door and place a handful of pellets, along with the
firelighter, into the cleaned fire trough and light it up, subsequently
closing the firebox door�
Attention
Do not use any flammable liquids to light up the fire!
5. SETTINGS
The main menu SETTINGS is provided to set, among others, the
heating times, Multi Air blower, frost protection etc�
Heating times
Using the heating times program you can operate your stove
according to the heating schedule� Activating heating times (ON)
gives access to setback temperature (only with RIKA room sensor),
and the heating times program�
Heating program
Heating times
Setback temp
Heating times
ON
14
15:55
Su 12.01.2020
In the heating times program, single weekdays, or a couple of
weekdays can be marked simultaneously (highlighted in
ORANGE
)�
Upon selecting heating time I or heating time II you can enter the ON
and OFF times you require for the marked weekdays�
Weekdays that have already been programmed are highlighted in
GREEN
when re-accessing the heating times program�
Heating time II
Heating time I
Heating times
ON
OFF
##:## ##:##
Mo
Tu
We
Fr
Th
Sa
Su
20:15 21:45
15:55
Su 12.01.2020
Tip
As soon as a weekday is marked, the saved heating times are
displayed�
If a number of weekdays are marked, only the identical heating
times are displayed� If the heating times differ from each other,
hash keys (##:##) are displayed�
Tip
If your stove does not start up although heating times have been
saved, please check if they are enabled (ON) and if your stove is in
STANDBY
operating state�