16
Air flaps
Motor fault
The air flaps are not in correct position�
Acknowledge the error message�
Room sensor
Room overheated
The room temperature has exceeded 30°C�
Allow the room to cool down�
You can only cancel the error at a room temperature of less
than 30°C�
Flue gas fan
Flue gas fan
Fault
Fan
The predefined speeds for the ID fan are not being reached�
Acknowledge the error message�
Flue gas fan
Fault
Speed meter
The speed meter is not functioning�
Acknowledge the error message�
Insertion motor
Insertion motor
blocked
The insertion motor is blocked�
Further operation is not possible, please inform customer
service�
Insertion motor
Motor fault
The insertion motor is malfunctioning�
Acknowledge the error message� If this occurs again, please
inform customer service�
Discharge motor
Discharge motor
blocked
The discharge motor is blocked�
Further operation is not possible, please inform customer
service�
Discharge motor
Motor fault
The discharge motor is malfunctioning�
Acknowledge the error message� If this occurs again, please
inform customer service�