10
7. EXTENDED OPERATING MODES - PELLETS / LOGS
(only combi stoves)
Your combi stove features an automatic fuel recognition and a
combustion regulation� Operation may any time switch between
pellets and logs�
Note
It is imperative to use the feed rates as indicated in the instructions
manual of your stove, without any exception�
Note
During the whole period of log operation the functions of heating
time, room temperature and frost protection, as well as the external
request are disabled� These functions will not be re-activated
before
log operation has finished�
Correct heating up
Note
Do not use any flammable liquids to light up the fire!
Open the firebox door and place 2 small pieces of chipboard in
longitudinal direction to either side of the firebox floor�
Place 2 or 3 logs crossways onto the chipboard�
Now place more chipboard pieces crossways and add 2-4 ribs of the
RIKA firelighter on top of the chipboard� If necessary, some uncoated
paper can be placed under the chipboard instead of the firelighter�
Now set the RIKA firelighter alight and close the firebox door�
Note
Be sure that the combustion trough is empty as the grid will tip
after the firebox door has been closed�
Tip
The RIKA firelighter no� E15834 is available from your RIKA dealer�
Automatic log operation
The automatic burn-off regulation shows the following sequence:
LOG CHECK
Your stove checks if logs have been placed�
LOG OPERATION / ECO OPERATION
Your stove ensures optimum log burn-off�
PLEASE RELOAD
Your stove indicates the time you should add more logs�
DO NOT RELOAD
Your stove reports that no ignition can be ensured after logs have
been added�
Eco Operation
For a small amount of fuel (partial load) you should use the
ECO OPERATION
mode� Under ‘Extended functions’, after closing the
firebox door you can switch to
ECO OPERATION
- the operating state
LOG CHECK
will change to
ECO OPERATION
�
Note
The
ECO OPERATION
mode is only possible after the first burn-off!