RIKA PELLET CONTROL, Руководство по эксплуатации

Страница: 9 / 24

Page 9 of 24
5.3. Room set temperature, weekly heating schedule
When you first plug-in your stove to the power outlet (with the pellet control
installed), the following information appears on the pellet control display:
This symbol indicates that the control is in the standby
position and is ready for operation.
Now program the control for your individual requirements as follows:
Two heating periods can be programmed for each day of the week. No heating
periods are programmed by the factory (all times are set to 00:00).
Press “MENU” on the pellet control and the following appears on the graphic
display:
„1“ (inverted) stands for Monday.
„00:00“ indicates in each case hours (0 to 23) : minutes (0 to
59)
„ON 1“ indicates the start of the first heating period
„OFF1“ indicates the end of the first heating period
„ON 2“ indicates the start of the second heating period
„OFF2“ indicates the end of the second heating period
Press „ENTER“ and the display appears:
The hour for ON 1 is inverted and can be changed in steps of
one hour as desired by pressing "+" and "-". The required
setting is confirmed and saved with "ENTER". The display
shows:
The minute for ON 1 is inverted and can be changed in steps
of one minute as desired by pressing "+" and "-". The
required setting is confirmed and saved with "ENTER". The
display shows:
STANDBY
ON 1 00:00
OFF1 00:00
ON 2 00:00
OFF2 00:00
1234567
ON 1 00:00
OFF1 00:00
ON 2 00:00
OFF2 00:00
1234567
ON 1 06:00
OFF1 00:00
ON 2 00:00
OFF2 00:00
1234567