RIKA PELLET CONTROL, Руководство по эксплуатации

Страница: 12 / 24

Page 12 of 24
For a room set temperature of OFF the device is switched OFF and the frost
protection mode is activated.
The required setting is confirmed and saved with "ENTER". The display shows:
“CLEAN” indicates the cleaning function. The number shows
the length of the cleaning interval in minutes (e.g. see
Window 60 minutes).
You can set the required cleaning interval in 5 minute steps using “+” and “-“
(the cleaning interval can be extended to a maximum of 300 minutes, however,
we recommend maintaining a 60-minutes cleaning cycle).
The value is confirmed by pressing “ENTER” and the display shows:
The symbol stands for ant-freezing operation.
“MINIM TEMP“ is the parameter for minimum room set
temperature at which anti-freezing operation switches on.
By pressing “+” and “-“ the minimum room set temperature for the anti-freezing
operation can be set and confirmed with “ENTER”. The display then shows:
The symbol stands for ant-freezing operation.
“MAX TEMP” is the parameter for maximum room set
temperature which the frost protection operation regulates to.
By pressing “+” and “-“ the maximum room set temperature for the anti-freezing
operation can be set and confirmed with “ENTER”. Then press the “MENU”
key and the display shows:
“TIME” is the parameter for the system clock.
“13:48 – 2” indicates the time (hours:minutes) and the
second day (=Tuesday) of the week.
CLEAN
MODE
060 MIN
MINIM.TEMP.
40°F
MAX.TEMP.
50°F
TIME
13:48 - 2
VERS:1.22A