Rigol DM3068, Руководство по обслуживанию

Страница: 43 / 70

Chapter 2 Performance Test RIGOL
Service Guide for DM3068
2-13
can adequately output).
Table 2-7 Frequency gain test items
Signal
Virtual
Value
Signal
Frequency
Quick
Test
[1]
Range
Allowable Error Range
24 hours 90 days 1 year
20mV 98Hz 200 mV ±4.9mHz ±5.88mHz ±6.86mHz
200mV 500kHz Q 2 V ±25Hz ±30Hz ±35Hz
Remark:
[1] Q denotes the optional quick test point.
5. To test the capacitance gain:
(1) Make sure you have carefully read the “Test Conditions”.
(2) Switch to Capacitance measurement and select a range listed in the table
below.
(3) Connect one end of a shielded cable to the input terminal of the meter and
leave the other end free, then enable the REL operation.
(4) Connect the other end to the calibrator.
(5) Input signals in accordance with the table below using the calibrator and
compare the results with the limits from the table (make sure the calibrator
can adequately output).
(6) Repeat step 2, 3, 4 and 5 to finish the test.
Table 2-8 Capacitance test items
Range
[1]
Test Signal Quick Test
[2]
Allowable Error Range
1 year
2.000nF 2nF Q ±90pF
20.00nF 20nF ±260pF
200.0nF 200nF ±2.6nF
2.000uF 2uF ±26nF
20.00uF 20uF ±260nF
200.0uF 200uF ±2.6μF
2.000mF 2mF ±26μF
20.00mF 20mF Q ±260μF
100.0mF 100mF ±3.2mF
Remarks:
[1] Specifications under the REL operation.
[2] Q denotes the optional quick test point.