Rigmaster MTS-T4-LGN, Руководство пользователя

Страница: 36 / 56

LGN Owner's Manual Air Filter
Page 34
LGN-Owners-Manual-071520
Replacing the Air Filter
A dirty air filter will restrict air flow to the carburetor, reducing engine
performance. If the engine is operated. In
dusty areas, clean the air cleaner more often
than specified in the MAINTENANCE
SCHEDULE section.
Replacing Air Filter
1. Remove the air cleaner cover.
Remove the foam element from the
air cleaner cover. Remove the
paper element from the air cleaner
case.
2. Check both air cleaner elements for
holes or tears and replaced it if
damaged.
3. Clean both air cleaner elements if they
are to be reused.
Foam Element: Clean in warm soapy water,
rinse and allow to dry thoroughly, or clean in
non-flammable solvent and allow to dry. Do not
put oil to the foam element.
Paper Element: Tap the element several times
on a hard surface to remove dirt or blow with
compressed air [not exceeding 30 psi (207kPa,
2.1 kg/cm
2
) through the element from the clean
side that faces the engine.
Never try to brush off dirt. Brushing will force dirt into the fibers.
4. Wipe dirt from the inside of the air cleaner case and cover, using a
moist rag. Be careful to prevent dirt from entering the air duct that leads
to the carburetor.
5. Place the foam element to the air cleaner cover. Reinstall the paper
element and the air cleaner cover to the air cleaner case
CAUTION
This filter canister ONLY accepts the Honda Approved
Air
Filter. Do not use
unapproved cross-referenced parts.
NOTE
The air filter should be inspected every 1000 hours of operation.
Figure 14- Air Filter
Changing Process