Rigmaster MTS-T4-LGN, Руководство пользователя

Страница: 15 / 56

LGN Owner's Manual Cabin Controller
Page 13
LGN-Owners-Manual-071520
If the unit is in advanced mode, pressing any of the basic control buttons will
return the unit to basic mode. Alternately, the control panel will return to basic
mode after two minutes of inactivity.
If the unit shows the current temperature, pressing either the up or down button
will show the set point temperature without changing it. Once the set point is
indicated, pressing up or down buttons will adjust the set point. The new set
point takes effect only when display is returned to show internal temperature.
2. Advanced Controls and Functions
The advanced controls are as follows:
1.
Power button controls whether the module is active. In inactive mode all
system functions including engine start, climate control and AutoStart are
disabled. You can still see the temperature reading, current time and use
the alarm clock function.
2.
Fan button is used to change fan setting. Pressing the button cycles
between auto, high, med, low, and off settings.
3.
Clear button will take you back to the main screen without saving any
information.
4.
Clock button is used to set the time/date/day menu features.
5.
Alarm button is used to set the alarm menu features.
6.
AutoStart button is used to access and set AutoStart menu features.
7.
Mode button is used to activate the different operational modes. Pressing
the mode button will back you out of a menu mode but does not save the
information just entered.
8.
Ext. Temp button will display the external temperature on the LCD when
pressed.
9.
Oprtg. Hours button will display the total hours of use.
10.
Select button enters the data and advances the program to the next menu
step. Pressing the select button will save the information when entering
operational data.
11. Left scroll button (

).
12. Right scroll button (

).
The left and right arrow buttons are used to locate the desired data and/or adjust
those values.