10
Figure 10b
Figure 10c
Figure 10a
A
A
D
D
E
E
B
B
C
C
Accessories
Odometer
Figure 10a:
The
odometer displays
distance traveled. To reset display to 0,
press button (A). To display total lifetime
distance traveled, press and hold button
(A) for one second. Lifetime distance will
be displayed in kilometers or thousands of
feet, depending on unit setting.
To switch between feet or meters, press
and hold button (A) until units change
(approximately 10 seconds).
Clamps
Attaching and removing
Figure 10b:
Most accessories are attached
to and removed from the frame with
clamps (B) and posts (C).
1. Loosen knob (D) and swing it down.
2. Swing band (E) up.
3. Place clamp (B) around oval bar.
4. Swing knob (D) up into slot on band (E).
5. Tighten thoroughly.
Placement of accessories on the frame
will vary according to the position and
abilities of the client and the number of
accessories used.
Figure 10c:
For slimmer clients, the clamps
for any accessory can be attached on
the inside of the top bar. This positions
accessories closer to the client. To
reposition posts (see page 15).