16
Handbrake
To prevent serious
injury or death:
• Use Pacer only on smooth level
surfaces.
• Hand brake is not intended to stop
Pacer on hills.
• Adult supervision is required at all times.
Attaching to base
Figure 16b:
1. Hook ball at end of cable onto silver
clip (A) located inside plastic housing (B)
on base.
2. Pull cable housing forward and down
to clip into the socket (C) of the plastic
housing on base.
3. Clip both brake cables together with the
brake cable clip.
Detaching from base
Pull cable out of socket (C) in plastic
housing (B) on base and lift up. Ball end of
cable will pop out of clip (A).
Operation
Figure 16c:
1. Squeeze lever to apply brake.
2. Push lever down (away from handle) to
apply parking brake.
Adjustments
Figure 16c:
To adjust brake, loosen or
tighten knob (D) till desired braking action
is reached. A 1/16" gap between rear
wheel and brake arm is recommended
See page 13 for arm prompt adjustments.
Figure 16a
WARNING
Tip
(
fi gure 16c)
:
If cable will not pull
far enough to clip into the socket of
the plastic housing, tighten adjustment
knob (D) on brake handle by turning
knob clockwise.
Figure 16b
Figure 16c
D
D
A
A
B
B
C
C
Handle
Lever
