13
Figure 13b attached outside top bar
Arm prompts
To prevent tipping and
resulting injury, do not
position handloops, arm prompts or arm
platforms at the extreme ends of the top
bar (see fi gure 13a).
Attaching
When Pacer is used in the anterior position,
it is recommended that arm prompts are
attached forward of the frame cross bar.
This creates stable positioning and leaves
plenty of room for other accessories.
Figure 13b:
The arm prompt clamps can be
attached on the outside of the top bar.
Figure 13c:
For slimmer clients, the clamps
for any accessory can be attached on
the inside of the top bar. This positions
accessories closer to the client. To
reposition clamps and posts (see pages 10
and 15).
Adjustments
Figures 13b and 14a:
Loosen knob (A) to:
• Slide arm pad toward or away from the
client along the post.
• Rotate up or down.
• Rotate in or out.
• Move the arm pad backward or forward.
To adjust the height of arm prompt:
1. Press button (B) and slide post to desired
position.
2. Release button and push post to
engage it.
Or completely remove the arm prompt from
the Pacer by pressing button (B) and pulling
out the post.
WARNING
A
A
B
B
Figure 13c attached inside top bar
Figure 13a
