18
Figure 18b
Figure 18a
Hip positioner
Attaching
To prevent tipping and
resulting injury, do not
position prompts at the rear ends of the
top bar (see fi gure 18a).
Figure 18b:
The hip positioner is designed
to encourage forward-leaning. Attach
this accessory with its two clamps and
handholds a few inches away from the end
of the top bar. Attach straps with buckles
(A) in front of the frame cross bar.
Refer to the warning above for important
safety information.
To attach the front of the hip positioner:
• Use buckles (A), attaching them at
desired location in front of cross bar.
To attach rear of hip positioner:
• Attach rings (B) to handholds.
Adjustments
To adjust position of handholds on frame:
• Loosen knob (C).
• Slide handholds and clamps to desired
position on frame.
To adjust rear height of hip positioner:
• Press button (D) and raise handholds to
desired height.
• Release button (D) and push down
handholds to engage them.
To raise and lower hip positioner
use
strap adjusters (E) at back and (F) at front.
WARNING
A
A
B
B
C
C
D
D
E
E
F
F
