14
Edge Sensors. RF659 Series
RF659 [Revision 2.0.0] 26.06.2018
11.1. Setting algorithm
To configure the controller, you will need: the RS485 converter to connect the
controller to a PC, and the RF659SP program.
- Turn off the controller.
- Fix the measuring heads in the working position.
- Connect the measuring heads to the controller.
- Using terminals 6, 7 and 8 of the 8-pin connector (see par.
) and the RS485
converter, connect the controller to the PC.
- Holding the
Enter
button pressed, feed power to the controller and wait for the
"rF659"
and
"tESt"
messages to appear.
- Run the RF659SP program.
- Select the COM port, to which the RS485 converter is connected. Set the
Net
number of device
parameter – 1. Click the
Connect
button.
