RF602 [Revision 1.2.0] 28.01.2019
Laser Triangulation Sensors. RF602 Series
23
If connection is not established, a prompt window will appear asking to make the
automatic search for the sensor:
·
Set the range of transmission rate search in the
Baud rate
line.
·
Set the range of network address search in the
Net address
line.
·
Press the
Search
button.
The program will perform the automatic search for the sensor by searching over
possible rates, network addresses and COM-ports of PC.
13.4. Checking of the sensor operability
Once the sensor is successfully identified, check its operability as follows:
·
place an object inside the sensor working range;
·
by pressing the
Request
button, obtain the result of one measurement on the
(
Current result
) indicator. The 06h request type is realized (see par.
);
·
pressing the
Stream
button will switch the sensor to the data stream transmission
mode. The 07h request type is realized (see par.
);
·
by moving the object, observe changes in the readings;
·
the status line in the lower part of the window will show the current data
transmission and refreshing rates.
To stop the data transmission, press the
Stop
stream
button.