22
Laser Triangulation Sensors. RF602 Series
RF602 [Revision 1.2.0] 28.01.2019
13.2. Program setup
Run
setup.exe
and follow the instructions of the installation wizard.
13.3. Obtaining connection to sensor (RS232/RS485)
Once the program is started, the main window appears:
To obtain connection via RS232/RS485 interfaces, go to
RS232/RS485 PC
settings
in the
Interface configuration parameters
panel:
·
Select the СОМ-port whereto the sensor is connected (logical port if the sensor is
connected via USB-adapter).
·
Select the transmission rate (
Baud rate
) at which the sensor works.
·
Select the sensor network address, if necessary.
·
Press the
Device identification
button.
If the selected parameters correspond to the parameters of the sensor interface, the
program will identify the sensor, read and display its configuration parameters:
