RIFT Actuators RIFT 200, Инструкция по установке, эксплуатации и обслуживанию

Страница: 16 / 23

16
RIFT®100Nm— 200 Nm LID &
PCB
Open
Closed
Auto/Manual
Analogue
Input
10 Way Power/Control Connector
Manual Re - Set
Button
Bluetooth Connected “ Flashing Green ”
8 x Bi - Colour
LED ’ s
(Red & Green)
Manual “ Flashing Red ”
SWITCHING RIFT® 200 ‘ ON ’ (POWERING UP)
Before the RIFT® 200 can be operated, it must be taken out of sleep/ storage mode and made functional.
To achieve this:
•
Follow the electrical connection and battery connection sequence on page 1 6
•
Press the Auto/Man Touch Pad. The RIFT® 200 will illuminate & Flash the LED (Red) and display the
position of the Actuator with 2 LED
’ s. The RIFT® 200 is ‘ awake ’
Displaying in the open position
Displaying in the closed position
The RIFT® 200 is now ready to either start functioning as an ON - OFF part - turn electric actuator. It could be
required, in an emergency to be able to move the RIFT® 200 actuator independent of the external
remote control signal. This is achieved with the use of an external touch pads or Android.
Touch Pad & Android App STANDARD/DEFAULT TOUCH PAD
FUNCTION How to use
AUTO/MAN Used to set the actuator to Local/
Remote control Touch & Hold (4 Seconds) to activate
OPEN Sends the actuator in a counter -
clockwise rotation to open the actuator.
Touch & Hold
CLOSE Sends the actuator in a clockwise
rotation to close the actuator. Menu DOWN
OPEN/CLOSE Move the Actuator to the fully opposite
position (Fully OPEN/Fully CLOSED) Double Tap OPEN/CLOSE Touch Pads or
the OPEN/CLOSE
Physical Re - Set Remove the Lid (6 x M4 Cap Head
Screws) to access Press to Re - Set
Software Re - Set User Interface under Basic Settings Click to Re - Set
12 O'clock
12 O'clock