15
LOW VOLTAGE EXTERNAL POWER SUPPLY CONNECTION
WIRING DIAGRAM
-
ON OFF FUNCTION FOR 24V AC /1ph OR 12
-
30V DC EXTERNAL POWER SUPPLY
LOCAL CONTROLS
The RIFT® 200 actuator has three physical external touch pads on the lid (and one internal reset button
located under the lid) that provide local control functionality. The features these provide simple Local
Control, when used in con
-
junction with the 8 highly visible centre LED array are;
•
Emergency hand operation to open or close the actuator.
•
Switch between local or remote control, isolate the RIFT® 200
This prevents the actuator from responding to Remote OPEN/CLOSE Commands and ANALOGUE
Signal Control
•
When mounting the RIFT® 200 actuator either, or make minor setting adjustments.
(Soft reset of the electronics, (similar to the Ctrl/Alt/Del) under Basic Settings option on the Android App
only
“
Reset Board Without Changing Settings
”
this will re
-
set the board and an audible tune should be
heard. The physical method is to remove the lid and press the re
-
set button on the PCB.
10
-
way Molex Plug Connector
Pin No
Connection Input / Output
Pin No
Connection Input / Output
1
90
–
300v AC Power Open Control
6
Relay Out (Closed Feedback Position)
2
90
–
300v AC Power Closed Control
7
Relay Out (Neutral Connection)
3
90
–
300v AC Neutral Connection
8
0
–
90v AC/DC Power Open Control
4
90
–
300v AC (PE) Protective Earth
9
0
–
90v AC/DC Power Closed Control
5
Relay Out (Open Feedback Position)
10
0
–
90v AC/DC Neutral Connection
5
-
way Fixed Connection
1
0
–
10v Analogue control (Out)
2
0
–
10v Analogue control (In)
3
Common connection for Analogue
4
20mA Analogue control (In)
5
20mA Analogue control (Out)
